Monthly Archives: May 2009

EMC Documentum Developer Edition

Today we launched a new EMC Documentum developer-oriented community within the EMC Community Network. Front and center is the new developer edition of the EMC Documentum ECM Platform.

So, what does this developer edition include? We believe it includes a lot of goodness for the development of content-enabled applications.

  • First of all, free software for developers
  • A new one-click installation process for the core of the EMC Documentum ECM Platform
  • xDB and new XML components – please visit the just-launched XML Technology Developer Community for more details about our native XML database and other technologies
  • Integration between the resulting development environment and online community resources and support mechanisms – think of this as a starting point and means to the ends you want to pursue, not an end in itself

Essentially, we’re trying to provide a low-touch, DIY experience. That being said, by integrating your local installation to an online community, the developer edition enables you to reach out to fellow developers and EMC employees as your pursuit your content management development interests grows. For example, you’ll find a range of white papers, documents and videos, as well as sample code in, for example, Java and C# (.NET). Topical tutorials available online are drawn from our Education Services library.

So, what is the process to obtain the free developer edition? We hope that it’s straightforward.

  1. Browse here and login into ECN/EDN
  2. Navigate here and complete a short (less than 30 seconds) registration form. Click the “Continue” button to proceed to the download site. (You may need to add to your email safe senders list so as not to miss messages from that address (i.e. have them interpreted by Outlook as junk).)
  3. Navigate the EMC SubscribeNet links to arrive at the FTP download (or HTTPS-based download, if you prefer). Note that the download is a bit more than 1.73 GB and represents a Zip archive, which means that you should ensure adequate disk space to extract, deploy, etc.
  4. Commence your download.

In a follow-up post, I’ll walk you through the installation experience and how to leverage the version of DFS that comes with the developer edition. BTW, if you’re too anxious to dive in and can’t wait for my post, go for it! There is an online getting started guide as well as an online tutorial for building your first application.

Cheers! :-)

Update 5/20/2009: Well, I’m about to take a much needed vacation, and I have yet to follow-up with a walk-thru post. So, I wanted to at least provide some details here as to what this software requires system-wise. System requirements are as follows (and are displayed in the initial installer screen):

  • No Microsoft SQL Server or SQL Server Express installed [1]
  • No other Documentum software installed [2]
  • Microsoft .NET 2.0 or higher [3]
  • Browser with Sun JRE 5.0 update 16 or higher [4]
  • Minimum of 3 GB RAM (4 GB RAM is recommended)
  • 5 GB of free disk space [5]
  • Intel x86 CPU
  • Operating system–again 32-bit only for this release–is one of the following: Windows XP SP3, Windows Server 2003 SP2 or Windows Server 2003 R2 SP2
  • You must be logged in as a member of the Windows Administrators group, but not necessarily as Administrator

[1] Be aware that if you already have Visual Studio (e.g. 2005 or 2008) installed on your target machine, you may need to first uninstall the version of SQL Server that may have been installed with the IDE. If you are running Windows SharePoint Services or UDDI on your target (Windows Server 2003) machine, you may also need to see what embedded database is supporting these services before proceeding with this developer edition installation.
[2] Be sure to understand where you may still have Documentum-related configuration files on disk (e.g., C:\Documentum, etc.).
[3] Microsoft .NET Framework 3.0 is required for WCF-based consumption of DFS endpoints; so, I recommend .NET 3.0, which includes (requires as its foundation) .NET 2.0. .NET 3.5 is also supported by DFS, if you prefer to leverage WCF “v2.”
[4] This is supported by Webtop and DA.
[5] Keep in mind that, as I noted above, the Zip archive download is a bit more than 1.73 GB. The total size of its extracted contents is not that much larger, but you’re also starting to approach 4 GB; so, I recommend that you have 10 GB free disk space in order to complete the installation with room to spare before cleaning up the extracted bits and the original archive to reclaim that 4 GB.

…and, welcome, CMS Watch readers! :-)

Update 7/16/2009: Be sure to run Windows Update after installing DevEd. Typically, you’ll need to apply SQL Server 2005 SP3. Note that if you upgrade a DevEd environment from 6.5 SP1 to 6.5 SP2 (via uninstall-reboot-install) that you should still run Windows Update after your upgrade, and you may need to re-apply SQL Server 2005 SP3.

When upgrading a DevEd environment from 6.5 SP1 to 6.5 SP2, I also recommend that following the uninstall and reboot, that you confirm C:\Documentum and C:\Program Files\Documentum are empty before you proceed to install the newer DevEd.

Finally, if you’re reading this blog but not the installation guide, please note that you should uninstall DevEd via Start | Programs | Documentum | Uninstall, not via Add/Remove Programs under Control Panel.

Content-enabled applications empathized

Laurence Hart was kind enough to pick-up my previous post on content-enabled applications and add his thoughts to the subject, especially concerning the role CMIS can play.

From my first post: Content-enabled applications should facilitate the convergence of content, collaboration, interaction, and process.

I agree with Laurence (aka JaneDoePie) that content is an enabler, not the center. All content-enabled applications “should be shaped to work with and enhance the process the users use to perform their work.”

Laurence offers case management as his favorite, generic content-enabled application in order to further ground the point that success is determined by the combination of content, user experience (interaction, more than just UI, IMHO) and process (e.g. collaborative workflow).

I’m in the middle of reading Subject To Change, and already I’ve found its message highly relevant to the subject of content-enabled applications. For example, the book focuses on experience strategy and how to develop organizational empathy where the target users of your products or services are concerned. Specifically, in the case of case management, the book would argue that you, as case management application architect/designer, need to actually observe case workers in their native setting to appreciate how case management really works (or doesn’t). Go beyond theory and someone else’s analysis. Experience business activity firsthand in order to model reality into your solution.

Recently as part of the Case Management Solution Framework xCelerated Composition Platform (xCP) released for D6.5 SP1, a sample application for grants management was shipped that illustrates how Process Suite components can be used to build case-based, content-enabled applications. You can download this package from Powerlink (authentication required). The easiest way to run this sample application is to install it using the express installer, which will install all the right components (with their compatible versions) and the DAR file. You can also download the express installer from Powerlink (authentication required).Please see the update below for the correct link.

A goal of a solution framework is to make it easier to build content-enabled applications such as those for case management. A solution framework should allow you to invest more time in becoming empathic in order to ship solutions that resonate well with your users and drive more efficient business as a result.

In this response, I wanted to focus on empathy’s role. Separately, I plan to pick up the CMIS angle raised by Laurence. Thanks in advance for joining our discussion online…

Update 5/1/2009: A PM colleague pointed out to me that the link to the “one click” installer that takes one from state “zero” (i.e. Windows but not database) to state “ready for proof of concept” is as follows: (authentication required). Cheers!